Flow Through System Pump
The Flow Through System Pump is a fixed-speed, self priming peristaltic pump. The peristaltic pump roller pressure squeezes fluid through the tubing. The flow is proportional to the speed of the rollers (rpm) and the inside diameter of the tubing).
The pump can be used to pump fluid or gas without contaminating the pump; the pumped material contacts the tube only.
PDF Brochures
| View Brochure by Flipbook | |
|---|---|
| PDF Brochure | |
Technical Specifications
| Temperature Range | -20ºC-40ºC |
| Flow Range | 0.06 to 2300 mL/min (0 to 36 GPH) |
| Maximum RPM | 300 RPM |
| Housing Material | Polysulfone or PPS |
| Rotor Material | Cold-rolled or stainless steel |
| Number of rollers | 6 |
| Catalog No. | RPM** 60Hz | Flow Rate (mL/min)*** Tube Size (ID x 3/32 in. Wall) |
||||
| 1/16* | 1/8 | 3/16 | 1/4 | |||
| Labomed | 900-1600 | 49 | 11 | 44 | 100 | 150 |
* Requires shim
** At 50 Hz, flow rate will be 16% lower
*** Flow rate accuracy: +-8%
CHEMICAL COMPATIBILITY
Selection of tubing material depends on the chemical being pumped.
Ask for our Tubing Guide to select the appropiate type of tubing links for the liquid in use.